الأربعاء، 2 يوليو 2014

كيف تمنع الحكومات من التجسس عليك عن طريق الdns

https://www.dnsleaktest.com/

http://www.opennicproject.org/configure-your-dns/how-to-change-dns-servers-in-

windows

How to change DNS Servers in 

Windows 7

This article is for people to change their Windows 7 DNS settings.  It will also override the DNS settings sent through DHCP so it is acceptable for most users of Windows 7.  You will need admin rights in order to preform some of these steps.
1. Choose two or more IP addresses from here, then open the Control Panel and click on Network and Sharing Center as seen below.

2. Click “Change Adapter Settings” in the left bar.

3. Right click on your network device and choose properties. In my case this was Local Area Connection, but it could also be a wireless adapter or named something else.

4.  Choose the IP version you would like to set the DNS settings for and click “properties”.  I will be choosing IPv4 for this guide, but the steps are basically identical for IPv6.

5.  In the window that pops up, click “Advanced” in the bottom right of the windows.

6. Click the “DNS” tab at the top.

7. Click Add and then type a Tier2 server IP in the box that pops up and click add again.

You may repeat the add step as many times as necessary to add DNS servers. They will be tried in the other that is listed on this page as well.
8. Click OK until you are out of dialogue boxes!  You should now be set up to use OpenNIC!
If you’re feeling adventurous and/or lazy, you can try this little app’!
87.216.170.8   prefect DNS server
185.16.40.143 alternal DNS server

0 التعليقات:

إرسال تعليق

Twitter Delicious Facebook Digg Stumbleupon Favorites More